Product Guides 2026-11-04

Spiral Wound Gasket Dimensions: ASME B16.20 Size Chart for B16.5 and B16.47 Flanges

Spiral wound gasket with inner ring and centering ring being measured with a caliper

Most spiral wound gasket dimensions are fixed by the flange: once you know the flange standard, nominal pipe size (NPS) and pressure class, ASME B16.20 gives the inner ring ID, the winding ID and OD, and the centering ring OD. This chart lists those dimensions for ASME B16.5 flanges (NPS ½–24) and ASME B16.47 Series A and Series B flanges (NPS 26–60), taken from ASME B16.20-2023.

All dimensions are in millimetres (1 in = 25.4 mm) and are nominal values from ASME B16.20-2023. Always quote the flange standard, NPS and pressure class together — for example “ASME B16.5, 4″, Class 300” — because the same NPS has different gasket sizes in different classes and standards.

Jump to:B16.5 (NPS ½–24)B16.47 Series AB16.47 Series BB16.47 inner rings

The Four Dimensions of a Spiral Wound Gasket

  • Inner ring ID: the bore of the gasket. The inner ring protects the winding from the process fluid and stops it buckling inward.
  • Winding ID and OD: the sealing element. The winding sits on the raised face of the flange.
  • Centering ring OD: the outer ring that sits inside the bolts and centres the gasket on the flange. It also limits compression.
  • Thickness: winding 4.45 mm (0.175 in) nominal; inner and centering rings 2.97–3.33 mm (about 3 mm).

Style names describe which parts are present: CG has a winding and a centering ring, CGI adds an inner ring, R is the winding alone and RIR is the winding with an inner ring. ASME B16.20 requires an inner ring for PTFE-filled gaskets, for Class 900 NPS 24 and larger, Class 1500 NPS 12 and larger, and Class 2500 NPS 4 and larger.

ASME B16.5 Spiral Wound Gasket Dimensions (NPS ½–24)

The winding OD is the same for Class 150 to 600 and changes only for Class 900 to 2500, while the winding ID and the centering ring OD change with each class. Table 1 gives the winding, Table 2 the centering ring and Table 3 the inner ring.

NPSID 150ID 300ID 400ID 600ID 900ID 1500ID 2500OD 150–600OD 900–2500
1/2″19.119.119.1*19.119.1*19.119.131.831.8
3/4″25.425.425.4*25.425.4*25.425.439.639.6
1″31.831.831.8*31.831.8*31.831.847.847.8
1-1/4″47.847.847.8*47.839.6*39.639.660.560.5
1-1/2″54.154.154.1*54.147.8*47.847.869.969.9
2″69.969.969.9*69.958.7*58.758.785.985.9
2-1/2″82.682.682.6*82.669.9*69.969.998.698.6
3″101.6101.6101.6*101.695.392.292.2120.7120.7
3-1/2″114.3114.3104.8*104.8———133.4—
4″127.0127.0120.7120.7120.7117.6117.6149.4149.4
5″155.7155.7147.6147.6147.6143.0143.0177.8177.8
6″182.6182.6174.8174.8174.8171.5171.5209.6209.6
8″233.4233.4225.6225.6222.3215.9215.9263.7257.3
10″287.3287.3274.6274.6276.4266.7270.0317.5311.2
12″339.9339.9327.2327.2323.9323.9317.5374.7368.3
14″371.6371.6362.0362.0355.6362.0—406.4400.1
16″422.4422.4412.8412.8412.8406.4—463.6457.2
18″474.7474.7469.9469.9463.6463.6—527.1520.7
20″525.5525.5520.7520.7520.7514.4—577.9571.5
22″593.8577.9577.9577.9———625.5—
24″628.7628.7628.7628.7628.7616.0—685.8679.5
Table 1. ASME B16.5 spiral wound gaskets: sealing element (winding) ID and OD by pressure class, mm. * Class 400 in NPS ½–3½ uses Class 600 dimensions; Class 900 in NPS ½–2½ uses Class 1500 dimensions. — = no such flange.
NPSClass 150Class 300Class 400Class 600Class 900Class 1500Class 2500
1/2″47.854.154.1*54.163.5*63.569.9
3/4″57.266.866.8*66.869.9*69.976.2
1″66.873.273.2*73.279.5*79.585.9
1-1/4″76.282.682.6*82.688.9*88.9104.9
1-1/2″85.995.395.3*95.398.6*98.6117.6
2″104.9111.3111.3*111.3143.0*143.0146.1
2-1/2″124.0130.3130.3*130.3165.1*165.1168.4
3″136.7149.4149.4*149.4168.4174.8196.9
3-1/2″161.9165.1161.9*161.9———
4″174.8181.1177.8193.8206.5209.6235.0
5″196.9215.9212.9241.3247.7254.0279.4
6″222.3251.0247.7266.7289.1282.7317.5
8″279.4308.1304.8320.8358.9352.6387.4
10″339.9362.0358.9400.1435.1435.1476.3
12″409.7422.4419.1457.2498.6520.7549.4
14″450.9485.9482.6492.3520.7577.9—
16″514.4539.8536.7565.2574.8641.4—
18″549.4596.9593.9612.9638.3704.9—
20″606.6654.1647.7682.8698.5755.7—
22″660.4704.9701.8733.6———
24″717.6774.7768.4790.7838.2901.7—
Table 2. ASME B16.5 spiral wound gaskets: centering (outer) ring OD, mm. * Substituted class as in Table 1.
NPSClass 150Class 300Class 400Class 600Class 900Class 1500Class 2500
1/2″14.214.214.2*14.214.2*14.214.2
3/4″20.620.620.6*20.620.6*20.620.6
1″26.926.926.9*26.926.9*26.926.9
1-1/4″38.138.138.1*38.133.3*33.333.3
1-1/2″44.544.544.5*44.541.4*41.441.4
2″55.655.655.6*55.652.3*52.352.3
2-1/2″66.566.566.5*66.563.5*63.563.5
3″81.081.081.0*81.078.778.778.7
3-1/2″101.1101.191.4*91.4———
4″106.4106.4102.6102.6102.697.897.8
5″131.8131.8128.3128.3128.3124.5124.5
6″157.2157.2154.9154.9154.9147.3147.3
8″215.9215.9205.7205.7196.9196.9196.9
10″268.2268.2255.3255.3246.1246.1246.1
12″317.5317.5307.3307.3292.1292.1292.1
14″349.3349.3342.9342.9320.8320.8—
16″400.1400.1389.9389.9374.7368.3—
18″449.3449.3438.2438.2425.5425.5—
20″500.1500.1489.0489.0482.6476.3—
22″568.4552.5546.2546.2———
24″603.3603.3590.6590.6590.6577.9—
Table 3. ASME B16.5 spiral wound gaskets: inner ring ID, mm. * Substituted class as in Table 1.

↑ Back to top

ASME B16.47 Spiral Wound Gasket Dimensions (NPS 26–60)

ASME B16.47 has two flange series with different bolt circles. Series A (formerly MSS SP-44) flanges are heavier; Series B (formerly API 605) flanges are more compact. A Series A gasket does not fit a Series B flange of the same NPS and class, so always confirm the series.

B16.47 Series A

NPSClass 150: ID / OD / ring ODClass 300: ID / OD / ring ODClass 400: ID / OD / ring ODClass 600: ID / OD / ring ODClass 900: ID / OD / ring OD
26″673.1 / 704.9 / 774.7685.8 / 736.6 / 835.2685.8 / 736.6 / 831.9685.8 / 736.6 / 866.9685.8 / 736.6 / 882.7
28″723.9 / 755.7 / 831.9736.6 / 787.4 / 898.7736.6 / 787.4 / 892.3736.6 / 787.4 / 914.4736.6 / 787.4 / 946.2
30″774.7 / 806.5 / 882.7793.8 / 844.6 / 952.5793.8 / 844.6 / 946.2793.8 / 844.6 / 971.6793.8 / 844.6 / 1009.7
32″825.5 / 860.6 / 939.8850.9 / 901.7 / 1006.6850.9 / 901.7 / 1003.3850.9 / 901.7 / 1022.4850.9 / 901.7 / 1073.2
34″876.3 / 911.4 / 990.6901.7 / 952.5 / 1057.4901.7 / 952.5 / 1054.1901.7 / 952.5 / 1073.2901.7 / 952.5 / 1136.7
36″927.1 / 968.5 / 1047.8955.8 / 1006.6 / 1117.6955.8 / 1006.6 / 1117.6955.8 / 1006.6 / 1130.3958.9 / 1009.7 / 1200.2
38″977.9 / 1019.3 / 1111.3977.9 / 1016.0 / 1054.1971.6 / 1022.4 / 1073.2990.6 / 1041.4 / 1104.91035.1 / 1085.9 / 1200.2
40″1028.7 / 1070.1 / 1162.11022.4 / 1070.1 / 1114.61025.7 / 1076.5 / 1127.31047.8 / 1098.6 / 1155.71098.6 / 1149.4 / 1251.0
42″1079.5 / 1124.0 / 1219.21073.2 / 1120.9 / 1165.41076.5 / 1127.3 / 1178.11104.9 / 1155.7 / 1219.21149.4 / 1200.2 / 1301.8
44″1130.3 / 1178.1 / 1276.41130.3 / 1181.1 / 1219.21130.3 / 1181.1 / 1231.91162.1 / 1212.9 / 1270.01206.5 / 1257.3 / 1368.6
46″1181.1 / 1228.9 / 1327.21178.1 / 1228.9 / 1273.31193.8 / 1244.6 / 1289.11212.9 / 1263.7 / 1327.21270.0 / 1320.8 / 1435.1
48″1231.9 / 1279.7 / 1384.31235.2 / 1286.0 / 1324.11244.6 / 1295.4 / 1346.21270.0 / 1320.8 / 1390.71320.8 / 1371.6 / 1485.9
50″1282.7 / 1333.5 / 1435.11295.4 / 1346.2 / 1378.01295.4 / 1346.2 / 1403.41320.8 / 1371.6 / 1447.8—
52″1333.5 / 1384.3 / 1492.31346.2 / 1397.0 / 1428.81346.2 / 1397.0 / 1454.21371.6 / 1422.4 / 1498.6—
54″1384.3 / 1435.1 / 1549.41403.4 / 1454.2 / 1492.31403.4 / 1454.2 / 1517.71428.8 / 1479.6 / 1555.8—
56″1435.1 / 1485.9 / 1606.61454.2 / 1505.0 / 1543.11454.2 / 1505.0 / 1568.51479.6 / 1530.4 / 1612.9—
58″1485.9 / 1536.7 / 1663.71511.3 / 1562.1 / 1593.91505.0 / 1555.8 / 1619.31536.7 / 1587.5 / 1663.7—
60″1536.7 / 1587.5 / 1714.51562.1 / 1612.9 / 1644.71568.5 / 1619.3 / 1682.81593.9 / 1644.7 / 1733.6—
Table 4. ASME B16.47 Series A spiral wound gaskets, mm: winding ID / winding OD / centering ring OD for each class. — = no such flange.

↑ Back to top

B16.47 Series B

NPSClass 150: ID / OD / ring ODClass 300: ID / OD / ring ODClass 400: ID / OD / ring ODClass 600: ID / OD / ring ODClass 900: ID / OD / ring OD
26″673.1 / 698.5 / 725.4673.1 / 711.2 / 771.7666.8 / 698.5 / 746.3663.7 / 714.5 / 765.3692.2 / 749.3 / 838.2
28″723.9 / 749.3 / 776.2723.9 / 762.0 / 825.5714.5 / 749.3 / 800.1704.9 / 755.7 / 819.2743.0 / 800.1 / 901.7
30″774.7 / 800.1 / 827.0774.7 / 812.8 / 886.0765.3 / 806.5 / 857.3778.0 / 828.8 / 879.6806.5 / 857.3 / 958.9
32″825.5 / 850.9 / 881.1825.5 / 863.6 / 939.8812.8 / 860.6 / 911.4831.9 / 882.7 / 933.5863.6 / 914.4 / 1016.0
34″876.3 / 908.1 / 935.0876.3 / 914.4 / 993.9866.9 / 911.4 / 962.2889.0 / 939.8 / 997.0920.8 / 971.6 / 1073.2
36″927.1 / 958.9 / 987.6927.1 / 965.2 / 1047.8917.7 / 965.2 / 1022.4939.8 / 990.6 / 1047.8946.2 / 997.0 / 1124.0
38″974.9 / 1009.7 / 1044.71009.7 / 1047.8 / 1098.6971.6 / 1022.4 / 1073.2990.6 / 1041.4 / 1104.91035.1 / 1085.9 / 1200.2
40″1022.4 / 1063.8 / 1095.51060.5 / 1098.6 / 1149.41025.7 / 1076.5 / 1127.31047.8 / 1098.6 / 1155.71098.6 / 1149.4 / 1251.0
42″1079.5 / 1114.6 / 1146.31111.3 / 1149.4 / 1200.21076.5 / 1127.3 / 1178.11104.9 / 1155.7 / 1219.21149.4 / 1200.2 / 1301.8
44″1124.0 / 1165.4 / 1197.11162.1 / 1200.2 / 1251.01130.3 / 1181.1 / 1231.91162.1 / 1212.9 / 1270.01206.5 / 1257.3 / 1368.6
46″1181.1 / 1224.0 / 1255.81216.2 / 1254.3 / 1317.81193.8 / 1244.6 / 1289.11212.9 / 1263.7 / 1327.21270.0 / 1320.8 / 1435.1
48″1231.9 / 1270.0 / 1306.61263.7 / 1311.4 / 1368.61244.6 / 1295.4 / 1346.21270.0 / 1320.8 / 1390.71320.8 / 1371.6 / 1485.9
50″1282.7 / 1325.6 / 1357.41317.8 / 1355.9 / 1419.41295.4 / 1346.2 / 1403.41320.8 / 1371.6 / 1447.8—
52″1333.5 / 1376.4 / 1408.21368.6 / 1406.7 / 1470.21346.2 / 1397.0 / 1454.21371.6 / 1422.4 / 1498.6—
54″1384.3 / 1422.4 / 1463.81403.4 / 1454.2 / 1530.41403.4 / 1454.2 / 1517.71428.8 / 1479.6 / 1555.8—
56″1444.8 / 1478.0 / 1514.61479.6 / 1524.0 / 1593.91454.2 / 1505.0 / 1568.51479.6 / 1530.4 / 1612.9—
58″1500.1 / 1528.8 / 1579.61535.2 / 1573.3 / 1655.81505.0 / 1555.8 / 1619.31536.7 / 1587.5 / 1663.7—
60″1557.3 / 1586.0 / 1630.41589.0 / 1630.4 / 1706.61568.5 / 1619.3 / 1682.81593.9 / 1644.7 / 1733.6—
Table 5. ASME B16.47 Series B spiral wound gaskets, mm: winding ID / winding OD / centering ring OD for each class. — = no such flange.

↑ Back to top

B16.47 Inner Ring ID

NPSSeries A, Class 150Series A, Class 300Series A, Class 400Series A, Class 600Series A, Class 900Series B, Class 150Series B, Class 300Series B, Class 400Series B, Class 600Series B, Class 900
26″654.1654.1660.4647.7660.4654.1654.1654.1644.7666.8
28″704.9704.9711.2698.5711.2704.9704.9701.8685.8717.6
30″755.7755.7755.7755.7768.4755.7755.7752.6752.6781.1
32″806.5806.5812.8812.8812.8806.5806.5800.1793.8838.2
34″857.3857.3863.6863.6863.6857.3857.3850.9850.9895.4
36″908.1908.1917.7917.7920.8908.1908.1898.7901.7920.8
38″958.9952.5952.5952.51009.7958.9971.6952.5952.51009.7
40″1009.71003.31000.31009.71060.51009.71022.41000.31009.71060.5
42″1060.51054.11051.11066.81111.31060.51085.91051.11066.81111.3
44″1111.31104.91104.91111.31155.71111.31124.01104.91111.31155.7
46″1162.11152.71168.41162.11219.21162.11178.11168.41162.11219.2
48″1212.91209.81206.51219.21270.01212.91231.91206.51219.21270.0
50″1263.71244.61257.31270.0—1263.71267.01257.31270.0—
52″1314.51320.81308.11320.8—1314.51317.81308.11320.8—
54″1358.91352.61352.61378.0—1365.31365.31352.61378.0—
56″1409.71403.41403.41428.8—1422.41428.81403.41428.8—
58″1460.51447.81454.21473.2—1478.01484.41454.21473.2—
60″1511.31524.01517.71530.4—1535.21557.31517.71530.4—
Table 6. ASME B16.47 spiral wound gaskets: inner ring ID, mm, Series A and Series B. — = no such flange.

↑ Back to top

How to Read an Inquiry

  • “SWG 4″ #300 SS316/GR CS outer” means ASME B16.5, NPS 4, Class 300, SS316 winding with graphite filler and a carbon steel centering ring — style CG unless an inner ring is named.
  • If the inquiry gives only a size and class, ask for the flange standard. B16.5 is the default for NPS 24 and below; above NPS 24, ask whether it is B16.47 Series A or B.
  • Non-standard gaskets (for heat exchangers, valves or EN 1514-2 flanges) need the inner ring ID, winding ID and OD, centering ring OD and thickness on a drawing.

For winding materials, fillers and colour coding, see our FS-G002 Spiral Wound Gasket page. To estimate freight, our spiral wound gasket weight chart gives CG and CGI weights by size and class. For RTJ flanges, see the ring joint gasket dimensions chart.

FAQ

What are the dimensions of a 4 inch Class 300 spiral wound gasket?

For ASME B16.5 NPS 4 Class 300: inner ring ID 106.4 mm, winding ID 127.0 mm, winding OD 149.4 mm and centering ring OD 181.1 mm, with a 4.45 mm winding and 3 mm rings.

Is the winding OD the same for every pressure class?

For ASME B16.5 flanges, the winding OD is the same for Class 150, 300, 400 and 600, and a different value applies to Class 900, 1500 and 2500. The winding ID and the centering ring OD change with the class.

When does a spiral wound gasket need an inner ring?

ASME B16.20 requires an inner ring for all PTFE-filled gaskets, and for Class 900 NPS 24 and larger, Class 1500 NPS 12 and larger, and Class 2500 NPS 4 and larger. Many users specify an inner ring for all sizes to protect the winding and the flange bore.

Can I use a B16.47 Series A gasket on a Series B flange?

No. Series A and Series B flanges of the same NPS and class have different bolt circles, so the centering ring OD is different and the gasket will not centre correctly.

Get a Quote for Spiral Wound Gaskets

Send us the flange standard, sizes, pressure classes, materials and quantities. We usually reply within 12 hours with a quotation and lead time.

💬 WhatsApp: +86 187 1010 7193
✉️ Email: sales@felixsealing.com
🌐 www.felixsealing.com

Quick reference: ASME B16.5 spiral wound gasket dimensions, Class 150, 300 and 600
  • NPS 1/2″ Class 150 spiral wound gasket dimensions (ASME B16.5): inner ring ID 14.2 mm, winding ID 19.1 mm, winding OD 31.8 mm, centering ring OD 47.8 mm.
  • NPS 1/2″ Class 300 spiral wound gasket dimensions (ASME B16.5): inner ring ID 14.2 mm, winding ID 19.1 mm, winding OD 31.8 mm, centering ring OD 54.1 mm.
  • NPS 1/2″ Class 600 spiral wound gasket dimensions (ASME B16.5): inner ring ID 14.2 mm, winding ID 19.1 mm, winding OD 31.8 mm, centering ring OD 54.1 mm.
  • NPS 3/4″ Class 150 spiral wound gasket dimensions (ASME B16.5): inner ring ID 20.6 mm, winding ID 25.4 mm, winding OD 39.6 mm, centering ring OD 57.2 mm.
  • NPS 3/4″ Class 300 spiral wound gasket dimensions (ASME B16.5): inner ring ID 20.6 mm, winding ID 25.4 mm, winding OD 39.6 mm, centering ring OD 66.8 mm.
  • NPS 3/4″ Class 600 spiral wound gasket dimensions (ASME B16.5): inner ring ID 20.6 mm, winding ID 25.4 mm, winding OD 39.6 mm, centering ring OD 66.8 mm.
  • NPS 1″ Class 150 spiral wound gasket dimensions (ASME B16.5): inner ring ID 26.9 mm, winding ID 31.8 mm, winding OD 47.8 mm, centering ring OD 66.8 mm.
  • NPS 1″ Class 300 spiral wound gasket dimensions (ASME B16.5): inner ring ID 26.9 mm, winding ID 31.8 mm, winding OD 47.8 mm, centering ring OD 73.2 mm.
  • NPS 1″ Class 600 spiral wound gasket dimensions (ASME B16.5): inner ring ID 26.9 mm, winding ID 31.8 mm, winding OD 47.8 mm, centering ring OD 73.2 mm.
  • NPS 1-1/4″ Class 150 spiral wound gasket dimensions (ASME B16.5): inner ring ID 38.1 mm, winding ID 47.8 mm, winding OD 60.5 mm, centering ring OD 76.2 mm.
  • NPS 1-1/4″ Class 300 spiral wound gasket dimensions (ASME B16.5): inner ring ID 38.1 mm, winding ID 47.8 mm, winding OD 60.5 mm, centering ring OD 82.6 mm.
  • NPS 1-1/4″ Class 600 spiral wound gasket dimensions (ASME B16.5): inner ring ID 38.1 mm, winding ID 47.8 mm, winding OD 60.5 mm, centering ring OD 82.6 mm.
  • NPS 1-1/2″ Class 150 spiral wound gasket dimensions (ASME B16.5): inner ring ID 44.5 mm, winding ID 54.1 mm, winding OD 69.9 mm, centering ring OD 85.9 mm.
  • NPS 1-1/2″ Class 300 spiral wound gasket dimensions (ASME B16.5): inner ring ID 44.5 mm, winding ID 54.1 mm, winding OD 69.9 mm, centering ring OD 95.3 mm.
  • NPS 1-1/2″ Class 600 spiral wound gasket dimensions (ASME B16.5): inner ring ID 44.5 mm, winding ID 54.1 mm, winding OD 69.9 mm, centering ring OD 95.3 mm.
  • NPS 2″ Class 150 spiral wound gasket dimensions (ASME B16.5): inner ring ID 55.6 mm, winding ID 69.9 mm, winding OD 85.9 mm, centering ring OD 104.9 mm.
  • NPS 2″ Class 300 spiral wound gasket dimensions (ASME B16.5): inner ring ID 55.6 mm, winding ID 69.9 mm, winding OD 85.9 mm, centering ring OD 111.3 mm.
  • NPS 2″ Class 600 spiral wound gasket dimensions (ASME B16.5): inner ring ID 55.6 mm, winding ID 69.9 mm, winding OD 85.9 mm, centering ring OD 111.3 mm.
  • NPS 2-1/2″ Class 150 spiral wound gasket dimensions (ASME B16.5): inner ring ID 66.5 mm, winding ID 82.6 mm, winding OD 98.6 mm, centering ring OD 124.0 mm.
  • NPS 2-1/2″ Class 300 spiral wound gasket dimensions (ASME B16.5): inner ring ID 66.5 mm, winding ID 82.6 mm, winding OD 98.6 mm, centering ring OD 130.3 mm.
  • NPS 2-1/2″ Class 600 spiral wound gasket dimensions (ASME B16.5): inner ring ID 66.5 mm, winding ID 82.6 mm, winding OD 98.6 mm, centering ring OD 130.3 mm.
  • NPS 3″ Class 150 spiral wound gasket dimensions (ASME B16.5): inner ring ID 81.0 mm, winding ID 101.6 mm, winding OD 120.7 mm, centering ring OD 136.7 mm.
  • NPS 3″ Class 300 spiral wound gasket dimensions (ASME B16.5): inner ring ID 81.0 mm, winding ID 101.6 mm, winding OD 120.7 mm, centering ring OD 149.4 mm.
  • NPS 3″ Class 600 spiral wound gasket dimensions (ASME B16.5): inner ring ID 81.0 mm, winding ID 101.6 mm, winding OD 120.7 mm, centering ring OD 149.4 mm.
  • NPS 3-1/2″ Class 150 spiral wound gasket dimensions (ASME B16.5): inner ring ID 101.1 mm, winding ID 114.3 mm, winding OD 133.4 mm, centering ring OD 161.9 mm.
  • NPS 3-1/2″ Class 300 spiral wound gasket dimensions (ASME B16.5): inner ring ID 101.1 mm, winding ID 114.3 mm, winding OD 133.4 mm, centering ring OD 165.1 mm.
  • NPS 3-1/2″ Class 600 spiral wound gasket dimensions (ASME B16.5): inner ring ID 91.4 mm, winding ID 104.8 mm, winding OD 133.4 mm, centering ring OD 161.9 mm.
  • NPS 4″ Class 150 spiral wound gasket dimensions (ASME B16.5): inner ring ID 106.4 mm, winding ID 127.0 mm, winding OD 149.4 mm, centering ring OD 174.8 mm.
  • NPS 4″ Class 300 spiral wound gasket dimensions (ASME B16.5): inner ring ID 106.4 mm, winding ID 127.0 mm, winding OD 149.4 mm, centering ring OD 181.1 mm.
  • NPS 4″ Class 600 spiral wound gasket dimensions (ASME B16.5): inner ring ID 102.6 mm, winding ID 120.7 mm, winding OD 149.4 mm, centering ring OD 193.8 mm.
  • NPS 5″ Class 150 spiral wound gasket dimensions (ASME B16.5): inner ring ID 131.8 mm, winding ID 155.7 mm, winding OD 177.8 mm, centering ring OD 196.9 mm.
  • NPS 5″ Class 300 spiral wound gasket dimensions (ASME B16.5): inner ring ID 131.8 mm, winding ID 155.7 mm, winding OD 177.8 mm, centering ring OD 215.9 mm.
  • NPS 5″ Class 600 spiral wound gasket dimensions (ASME B16.5): inner ring ID 128.3 mm, winding ID 147.6 mm, winding OD 177.8 mm, centering ring OD 241.3 mm.
  • NPS 6″ Class 150 spiral wound gasket dimensions (ASME B16.5): inner ring ID 157.2 mm, winding ID 182.6 mm, winding OD 209.6 mm, centering ring OD 222.3 mm.
  • NPS 6″ Class 300 spiral wound gasket dimensions (ASME B16.5): inner ring ID 157.2 mm, winding ID 182.6 mm, winding OD 209.6 mm, centering ring OD 251.0 mm.
  • NPS 6″ Class 600 spiral wound gasket dimensions (ASME B16.5): inner ring ID 154.9 mm, winding ID 174.8 mm, winding OD 209.6 mm, centering ring OD 266.7 mm.
  • NPS 8″ Class 150 spiral wound gasket dimensions (ASME B16.5): inner ring ID 215.9 mm, winding ID 233.4 mm, winding OD 263.7 mm, centering ring OD 279.4 mm.
  • NPS 8″ Class 300 spiral wound gasket dimensions (ASME B16.5): inner ring ID 215.9 mm, winding ID 233.4 mm, winding OD 263.7 mm, centering ring OD 308.1 mm.
  • NPS 8″ Class 600 spiral wound gasket dimensions (ASME B16.5): inner ring ID 205.7 mm, winding ID 225.6 mm, winding OD 263.7 mm, centering ring OD 320.8 mm.
  • NPS 10″ Class 150 spiral wound gasket dimensions (ASME B16.5): inner ring ID 268.2 mm, winding ID 287.3 mm, winding OD 317.5 mm, centering ring OD 339.9 mm.
  • NPS 10″ Class 300 spiral wound gasket dimensions (ASME B16.5): inner ring ID 268.2 mm, winding ID 287.3 mm, winding OD 317.5 mm, centering ring OD 362.0 mm.
  • NPS 10″ Class 600 spiral wound gasket dimensions (ASME B16.5): inner ring ID 255.3 mm, winding ID 274.6 mm, winding OD 317.5 mm, centering ring OD 400.1 mm.
  • NPS 12″ Class 150 spiral wound gasket dimensions (ASME B16.5): inner ring ID 317.5 mm, winding ID 339.9 mm, winding OD 374.7 mm, centering ring OD 409.7 mm.
  • NPS 12″ Class 300 spiral wound gasket dimensions (ASME B16.5): inner ring ID 317.5 mm, winding ID 339.9 mm, winding OD 374.7 mm, centering ring OD 422.4 mm.
  • NPS 12″ Class 600 spiral wound gasket dimensions (ASME B16.5): inner ring ID 307.3 mm, winding ID 327.2 mm, winding OD 374.7 mm, centering ring OD 457.2 mm.
  • NPS 14″ Class 150 spiral wound gasket dimensions (ASME B16.5): inner ring ID 349.3 mm, winding ID 371.6 mm, winding OD 406.4 mm, centering ring OD 450.9 mm.
  • NPS 14″ Class 300 spiral wound gasket dimensions (ASME B16.5): inner ring ID 349.3 mm, winding ID 371.6 mm, winding OD 406.4 mm, centering ring OD 485.9 mm.
  • NPS 14″ Class 600 spiral wound gasket dimensions (ASME B16.5): inner ring ID 342.9 mm, winding ID 362.0 mm, winding OD 406.4 mm, centering ring OD 492.3 mm.
  • NPS 16″ Class 150 spiral wound gasket dimensions (ASME B16.5): inner ring ID 400.1 mm, winding ID 422.4 mm, winding OD 463.6 mm, centering ring OD 514.4 mm.
  • NPS 16″ Class 300 spiral wound gasket dimensions (ASME B16.5): inner ring ID 400.1 mm, winding ID 422.4 mm, winding OD 463.6 mm, centering ring OD 539.8 mm.
  • NPS 16″ Class 600 spiral wound gasket dimensions (ASME B16.5): inner ring ID 389.9 mm, winding ID 412.8 mm, winding OD 463.6 mm, centering ring OD 565.2 mm.
  • NPS 18″ Class 150 spiral wound gasket dimensions (ASME B16.5): inner ring ID 449.3 mm, winding ID 474.7 mm, winding OD 527.1 mm, centering ring OD 549.4 mm.
  • NPS 18″ Class 300 spiral wound gasket dimensions (ASME B16.5): inner ring ID 449.3 mm, winding ID 474.7 mm, winding OD 527.1 mm, centering ring OD 596.9 mm.
  • NPS 18″ Class 600 spiral wound gasket dimensions (ASME B16.5): inner ring ID 438.2 mm, winding ID 469.9 mm, winding OD 527.1 mm, centering ring OD 612.9 mm.
  • NPS 20″ Class 150 spiral wound gasket dimensions (ASME B16.5): inner ring ID 500.1 mm, winding ID 525.5 mm, winding OD 577.9 mm, centering ring OD 606.6 mm.
  • NPS 20″ Class 300 spiral wound gasket dimensions (ASME B16.5): inner ring ID 500.1 mm, winding ID 525.5 mm, winding OD 577.9 mm, centering ring OD 654.1 mm.
  • NPS 20″ Class 600 spiral wound gasket dimensions (ASME B16.5): inner ring ID 489.0 mm, winding ID 520.7 mm, winding OD 577.9 mm, centering ring OD 682.8 mm.
  • NPS 22″ Class 150 spiral wound gasket dimensions (ASME B16.5): inner ring ID 568.4 mm, winding ID 593.8 mm, winding OD 625.5 mm, centering ring OD 660.4 mm.
  • NPS 22″ Class 300 spiral wound gasket dimensions (ASME B16.5): inner ring ID 552.5 mm, winding ID 577.9 mm, winding OD 625.5 mm, centering ring OD 704.9 mm.
  • NPS 22″ Class 600 spiral wound gasket dimensions (ASME B16.5): inner ring ID 546.2 mm, winding ID 577.9 mm, winding OD 625.5 mm, centering ring OD 733.6 mm.
  • NPS 24″ Class 150 spiral wound gasket dimensions (ASME B16.5): inner ring ID 603.3 mm, winding ID 628.7 mm, winding OD 685.8 mm, centering ring OD 717.6 mm.
  • NPS 24″ Class 300 spiral wound gasket dimensions (ASME B16.5): inner ring ID 603.3 mm, winding ID 628.7 mm, winding OD 685.8 mm, centering ring OD 774.7 mm.
  • NPS 24″ Class 600 spiral wound gasket dimensions (ASME B16.5): inner ring ID 590.6 mm, winding ID 628.7 mm, winding OD 685.8 mm, centering ring OD 790.7 mm.