Ring Joint Gasket Weight Chart: R, RX and BX Weights in kg and lb (ASME B16.20)

Ring joint gasket weight comes up in almost every RTJ order: for freight quotes, for DDP pricing, for sizing the export crate, and for checking a supplier’s quotation. Catalog weights are spread across different manufacturers’ tables, and several of them contain copied or shifted values. This chart lists theoretical weights for every R, RX and BX ring in ASME B16.20, in carbon steel and SS316, with density factors for other materials.
⚠️ Theoretical weights only. All weights in this chart are theoretical values based on nominal ASME B16.20 dimensions. Actual ring weights usually differ from these figures and are often slightly higher, because of machining allowance and manufacturing tolerances. Always use the actual weighed figures for freight, packing and invoicing.
How These Weights Were Determined
Dimensions come from ASME B16.20-2023. Weights were compiled from published manufacturer catalogs and checked against a weight calculated from the B16.20 cross-section: section area × π × mean diameter × density.
Ring numbers are written in several ways — RX-54, RX54 or RX 54, and R-46, R46 or R 46 — all refer to the same ring. The tables list both forms.
The key check is simple: rings with the same cross-section (A, H, C) weigh in proportion to their mean diameter. Ring numbers do not follow size, because rings for different pressure classes are interleaved, so a higher ring number is not always a heavier ring. Where a catalog value broke this rule (for example the RX-25/26, RX-89 to 91, BX-155 and BX-162 entries in some public tables), the value was corrected.
- Weights are per piece, in kg and lb (1 kg = 2.205 lb), on a carbon steel / soft iron basis (7.85 g/cm³). SS316 columns are carbon steel × 1.017.
- ID is calculated from the dimensions: R type = P − A; RX and BX = OD − 2 × A.
- Weights are theoretical and exclude plating and machining tolerance. For freight and invoicing, use the factory’s actual weighed figures.
R-Type Ring Joint Gasket Weights (Oval and Octagonal)
R-type rings fit ASME B16.5, B16.47 Series A and API 6B flanges. Octagonal and oval rings with the same number fit the same groove; the oval ring is usually slightly heavier. R-80 and larger are made in octagonal section only.
| Ring No. | Pitch dia. P (mm) | Width A (mm) | ID (mm) | Oval, CS (kg / lb) | Octagonal, CS (kg / lb) | Octagonal, SS316 (kg / lb) |
|---|---|---|---|---|---|---|
| R-11 (R11) | 34.14 | 6.35 | 27.79 | 0.050 / 0.110 | 0.047 / 0.104 | 0.048 / 0.105 |
| R-12 (R12) | 39.70 | 7.95 | 31.75 | 0.098 / 0.216 | 0.091 / 0.201 | 0.093 / 0.204 |
| R-13 (R13) | 42.88 | 7.95 | 34.93 | 0.106 / 0.234 | 0.098 / 0.216 | 0.100 / 0.220 |
| R-14 (R14) | 44.45 | 7.95 | 36.50 | 0.110 / 0.243 | 0.102 / 0.225 | 0.104 / 0.229 |
| R-15 (R15) | 47.63 | 7.95 | 39.68 | 0.118 / 0.260 | 0.109 / 0.240 | 0.111 / 0.244 |
| R-16 (R16) | 50.80 | 7.95 | 42.85 | 0.126 / 0.278 | 0.116 / 0.256 | 0.118 / 0.260 |
| R-17 (R17) | 57.15 | 7.95 | 49.20 | 0.141 / 0.311 | 0.131 / 0.289 | 0.133 / 0.294 |
| R-18 (R18) | 60.33 | 7.95 | 52.38 | 0.149 / 0.328 | 0.138 / 0.304 | 0.140 / 0.309 |
| R-19 (R19) | 65.10 | 7.95 | 57.15 | 0.161 / 0.355 | 0.149 / 0.328 | 0.151 / 0.334 |
| R-20 (R20) | 68.28 | 7.95 | 60.33 | 0.169 / 0.373 | 0.156 / 0.344 | 0.159 / 0.350 |
| R-21 (R21) | 72.24 | 11.13 | 61.11 | 0.299 / 0.659 | 0.292 / 0.644 | 0.297 / 0.654 |
| R-22 (R22) | 82.55 | 7.95 | 74.60 | 0.204 / 0.450 | 0.188 / 0.414 | 0.191 / 0.421 |
| R-23 (R23) | 82.55 | 11.13 | 71.42 | 0.342 / 0.754 | 0.333 / 0.734 | 0.339 / 0.746 |
| R-24 (R24) | 95.25 | 11.13 | 84.12 | 0.395 / 0.871 | 0.384 / 0.847 | 0.390 / 0.861 |
| R-25 (R25) | 101.60 | 7.95 | 93.65 | 0.251 / 0.553 | 0.231 / 0.509 | 0.235 / 0.518 |
| R-26 (R26) | 101.60 | 11.13 | 90.47 | 0.422 / 0.930 | 0.410 / 0.904 | 0.417 / 0.919 |
| R-27 (R27) | 107.95 | 11.13 | 96.82 | 0.476 / 1.05 | 0.435 / 0.959 | 0.442 / 0.975 |
| R-28 (R28) | 111.13 | 12.70 | 98.43 | 0.569 / 1.25 | 0.558 / 1.23 | 0.567 / 1.25 |
| R-29 (R29) | 114.30 | 7.95 | 106.35 | 0.282 / 0.622 | 0.261 / 0.575 | 0.265 / 0.585 |
| R-30 (R30) | 117.48 | 11.13 | 106.35 | 0.488 / 1.08 | 0.475 / 1.05 | 0.483 / 1.06 |
| R-31 (R31) | 123.83 | 11.13 | 112.70 | 0.513 / 1.13 | 0.499 / 1.10 | 0.507 / 1.12 |
| R-32 (R32) | 127.00 | 12.70 | 114.30 | 0.651 / 1.44 | 0.637 / 1.40 | 0.648 / 1.43 |
| R-33 (R33) | 131.78 | 7.95 | 123.83 | 0.326 / 0.719 | 0.301 / 0.664 | 0.306 / 0.675 |
| R-34 (R34) | 131.78 | 11.13 | 120.65 | 0.544 / 1.20 | 0.531 / 1.17 | 0.540 / 1.19 |
| R-35 (R35) | 136.53 | 11.13 | 125.40 | 0.567 / 1.25 | 0.549 / 1.21 | 0.558 / 1.23 |
| R-36 (R36) | 149.23 | 7.95 | 141.28 | 0.369 / 0.814 | 0.333 / 0.734 | 0.339 / 0.746 |
| R-37 (R37) | 149.23 | 11.13 | 138.10 | 0.617 / 1.36 | 0.603 / 1.33 | 0.613 / 1.35 |
| R-38 (R38) | 157.18 | 15.88 | 141.30 | 1.16 / 2.56 | 1.14 / 2.52 | 1.16 / 2.56 |
| R-39 (R39) | 161.93 | 11.13 | 150.80 | 0.671 / 1.48 | 0.653 / 1.44 | 0.664 / 1.46 |
| R-40 (R40) | 171.45 | 7.95 | 163.50 | 0.424 / 0.935 | 0.392 / 0.864 | 0.398 / 0.879 |
| R-41 (R41) | 180.98 | 11.13 | 169.85 | 0.753 / 1.66 | 0.730 / 1.61 | 0.742 / 1.64 |
| R-42 (R42) | 190.50 | 19.05 | 171.45 | 1.91 / 4.21 | 1.89 / 4.16 | 1.92 / 4.23 |
| R-43 (R43) | 193.68 | 7.95 | 185.73 | 0.479 / 1.06 | 0.442 / 0.974 | 0.449 / 0.991 |
| R-44 (R44) | 193.68 | 11.13 | 182.55 | 0.803 / 1.77 | 0.785 / 1.73 | 0.798 / 1.76 |
| R-45 (R45) | 211.15 | 11.13 | 200.02 | 0.875 / 1.93 | 0.853 / 1.88 | 0.867 / 1.91 |
| R-46 (R46) | 211.15 | 12.70 | 198.45 | 1.08 / 2.39 | 1.06 / 2.33 | 1.07 / 2.37 |
| R-47 (R47) | 228.60 | 19.05 | 209.55 | 2.29 / 5.06 | 2.26 / 4.99 | 2.30 / 5.07 |
| R-48 (R48) | 247.65 | 7.95 | 239.70 | 0.612 / 1.35 | 0.562 / 1.24 | 0.571 / 1.26 |
| R-49 (R49) | 269.88 | 11.13 | 258.75 | 1.12 / 2.47 | 1.09 / 2.40 | 1.11 / 2.44 |
| R-50 (R50) | 269.88 | 15.88 | 254.00 | 2.00 / 4.40 | 1.96 / 4.32 | 1.99 / 4.39 |
| R-51 (R51) | 279.40 | 22.23 | 257.17 | 3.65 / 8.05 | 3.71 / 8.17 | 3.77 / 8.31 |
| R-52 (R52) | 304.80 | 7.95 | 296.85 | 0.753 / 1.66 | 0.694 / 1.53 | 0.705 / 1.56 |
| R-53 (R53) | 323.85 | 11.13 | 312.72 | 1.36 / 3.00 | 1.31 / 2.88 | 1.33 / 2.93 |
| R-54 (R54) | 323.85 | 15.88 | 307.97 | 2.40 / 5.29 | 2.35 / 5.18 | 2.39 / 5.27 |
| R-55 (R55) | 342.90 | 28.58 | 314.32 | 7.36 / 16.2 | 7.73 / 17.0 | 7.86 / 17.3 |
| R-56 (R56) | 381.00 | 7.95 | 373.05 | 0.939 / 2.07 | 0.871 / 1.92 | 0.885 / 1.95 |
| R-57 (R57) | 381.00 | 11.13 | 369.87 | 1.58 / 3.48 | 1.53 / 3.38 | 1.56 / 3.44 |
| R-58 (R58) | 381.00 | 22.23 | 358.77 | 4.99 / 11.0 | 5.05 / 11.1 | 5.13 / 11.3 |
| R-59 (R59) | 396.88 | 7.95 | 388.93 | 0.980 / 2.16 | 0.907 / 2.00 | 0.922 / 2.03 |
| R-60 (R60) | 406.40 | 31.75 | 374.65 | 10.48 / 23.1 | 10.66 / 23.5 | 10.84 / 23.9 |
| R-61 (R61) | 419.10 | 11.13 | 407.97 | 1.74 / 3.83 | 1.69 / 3.73 | 1.72 / 3.79 |
| R-62 (R62) | 419.10 | 15.88 | 403.22 | 3.10 / 6.84 | 3.04 / 6.71 | 3.09 / 6.82 |
| R-63 (R63) | 419.10 | 25.40 | 393.70 | 7.35 / 16.2 | 7.56 / 16.7 | 7.69 / 16.9 |
| R-64 (R64) | 454.03 | 7.95 | 446.08 | 1.12 / 2.47 | 1.04 / 2.29 | 1.06 / 2.33 |
| R-65 (R65) | 469.90 | 11.13 | 458.77 | 1.95 / 4.30 | 1.90 / 4.18 | 1.93 / 4.25 |
| R-66 (R66) | 469.90 | 15.88 | 454.02 | 3.48 / 7.67 | 3.42 / 7.53 | 3.47 / 7.66 |
| R-67 (R67) | 469.90 | 28.58 | 441.32 | 10.12 / 22.3 | 10.61 / 23.4 | 10.79 / 23.8 |
| R-68 (R68) | 517.53 | 7.95 | 509.58 | 1.28 / 2.82 | 1.18 / 2.60 | 1.20 / 2.64 |
| R-69 (R69) | 533.40 | 11.13 | 522.27 | 2.21 / 4.87 | 2.15 / 4.74 | 2.19 / 4.82 |
| R-70 (R70) | 533.40 | 19.05 | 514.35 | 5.35 / 11.8 | 5.28 / 11.6 | 5.37 / 11.8 |
| R-71 (R71) | 533.40 | 28.58 | 504.82 | 11.43 / 25.2 | 12.02 / 26.5 | 12.22 / 26.9 |
| R-72 (R72) | 558.80 | 7.95 | 550.85 | 1.38 / 3.04 | 1.27 / 2.81 | 1.30 / 2.86 |
| R-73 (R73) | 584.20 | 12.70 | 571.50 | 2.99 / 6.60 | 2.94 / 6.47 | 2.98 / 6.58 |
| R-74 (R74) | 584.20 | 19.05 | 565.15 | 5.87 / 12.9 | 5.78 / 12.7 | 5.88 / 13.0 |
| R-75 (R75) | 584.20 | 31.75 | 552.45 | 15.11 / 33.3 | 16.01 / 35.3 | 16.28 / 35.9 |
| R-76 (R76) | 673.10 | 7.95 | 665.15 | 1.66 / 3.66 | 1.53 / 3.38 | 1.56 / 3.44 |
| R-77 (R77) | 692.15 | 15.88 | 676.27 | 5.13 / 11.3 | 5.04 / 11.1 | 5.12 / 11.3 |
| R-78 (R78) | 692.15 | 25.40 | 666.75 | 12.29 / 27.1 | 12.51 / 27.6 | 12.72 / 28.0 |
| R-79 (R79) | 692.15 | 34.93 | 657.22 | 22.09 / 48.7 | 22.57 / 49.7 | 22.94 / 50.6 |
| R-80 (R80) | 615.95 | 7.95 | 608.00 | — | 1.59 / 3.51 | 1.62 / 3.56 |
| R-81 (R81) | 635.00 | 14.30 | 620.70 | — | 4.05 / 8.93 | 4.12 / 9.08 |
| R-82 (R82) | 57.15 | 11.13 | 46.02 | — | 0.230 / 0.507 | 0.234 / 0.515 |
| R-84 (R84) | 63.50 | 11.13 | 52.37 | — | 0.250 / 0.551 | 0.254 / 0.560 |
| R-85 (R85) | 79.38 | 12.70 | 66.68 | — | 0.400 / 0.882 | 0.407 / 0.896 |
| R-86 (R86) | 90.50 | 15.88 | 74.62 | — | 0.650 / 1.43 | 0.661 / 1.46 |
| R-87 (R87) | 100.03 | 15.88 | 84.15 | — | 0.720 / 1.59 | 0.732 / 1.61 |
| R-88 (R88) | 123.83 | 19.05 | 104.78 | — | 1.22 / 2.69 | 1.24 / 2.73 |
| R-89 (R89) | 114.30 | 19.05 | 95.25 | — | 1.13 / 2.49 | 1.15 / 2.53 |
| R-90 (R90) | 155.58 | 22.23 | 133.35 | — | 2.05 / 4.52 | 2.08 / 4.59 |
| R-91 (R91) | 260.35 | 31.75 | 228.60 | — | 7.10 / 15.7 | 7.22 / 15.9 |
| R-92 (R92) | 228.60 | 11.13 | 217.47 | — | 0.940 / 2.07 | 0.956 / 2.11 |
| R-93 (R93) | 749.30 | 19.05 | 730.25 | — | 7.40 / 16.3 | 7.52 / 16.6 |
| R-94 (R94) | 800.10 | 19.05 | 781.05 | — | 7.90 / 17.4 | 8.03 / 17.7 |
| R-95 (R95) | 857.25 | 19.05 | 838.20 | — | 8.47 / 18.7 | 8.61 / 19.0 |
| R-96 (R96) | 914.40 | 22.23 | 892.17 | — | 12.08 / 26.6 | 12.28 / 27.1 |
| R-97 (R97) | 965.20 | 22.23 | 942.97 | — | 12.75 / 28.1 | 12.96 / 28.6 |
| R-98 (R98) | 1022.35 | 22.23 | 1000.12 | — | 13.51 / 29.8 | 13.73 / 30.3 |
| R-99 (R99) | 234.95 | 11.13 | 223.82 | — | 0.950 / 2.09 | 0.966 / 2.13 |
| R-100 (R100) | 749.30 | 28.58 | 720.72 | — | 16.79 / 37.0 | 17.07 / 37.6 |
| R-101 (R101) | 800.10 | 31.75 | 768.35 | — | 21.83 / 48.1 | 22.19 / 48.9 |
| R-102 (R102) | 857.25 | 31.75 | 825.50 | — | 23.39 / 51.6 | 23.78 / 52.4 |
| R-103 (R103) | 914.40 | 31.75 | 882.65 | — | 24.95 / 55.0 | 25.36 / 55.9 |
| R-104 (R104) | 965.20 | 34.93 | 930.27 | — | 31.49 / 69.4 | 32.01 / 70.6 |
| R-105 (R105) | 1022.35 | 34.93 | 987.42 | — | 33.35 / 73.5 | 33.90 / 74.7 |
RX-Type Ring Joint Gasket Weights
RX rings are pressure-energized and fit the same API 6B grooves as R rings with the same number. They are taller, so they weigh more: an RX-54 weighs about 2.92 kg in carbon steel, against about 2.35–2.40 kg for an R-54.
| Ring No. | OD (mm) | Width A (mm) | Height H (mm) | ID (mm) | Carbon steel (kg / lb) | SS316 (kg / lb) |
|---|---|---|---|---|---|---|
| RX-20 (RX20) | 76.20 | 8.74 | 19.05 | 58.72 | 0.240 / 0.529 | 0.244 / 0.538 |
| RX-23 (RX23) | 93.27 | 11.91 | 25.40 | 69.45 | 0.520 / 1.15 | 0.529 / 1.17 |
| RX-24 (RX24) | 105.97 | 11.91 | 25.40 | 82.15 | 0.600 / 1.32 | 0.610 / 1.34 |
| RX-25 (RX25) | 109.55 | 8.74 | 19.05 | 92.07 | 0.360 / 0.794 | 0.366 / 0.807 |
| RX-26 (RX26) | 111.91 | 11.91 | 25.40 | 88.09 | 0.640 / 1.41 | 0.651 / 1.43 |
| RX-27 (RX27) | 118.26 | 11.91 | 25.40 | 94.44 | 0.680 / 1.50 | 0.691 / 1.52 |
| RX-31 (RX31) | 134.54 | 11.91 | 25.40 | 110.72 | 0.780 / 1.72 | 0.793 / 1.75 |
| RX-35 (RX35) | 147.24 | 11.91 | 25.40 | 123.42 | 0.860 / 1.90 | 0.874 / 1.93 |
| RX-37 (RX37) | 159.94 | 11.91 | 25.40 | 136.12 | 0.950 / 2.09 | 0.966 / 2.13 |
| RX-39 (RX39) | 172.64 | 11.91 | 25.40 | 148.82 | 1.03 / 2.27 | 1.05 / 2.31 |
| RX-41 (RX41) | 191.69 | 11.91 | 25.40 | 167.87 | 1.15 / 2.54 | 1.17 / 2.58 |
| RX-44 (RX44) | 204.39 | 11.91 | 25.40 | 180.57 | 1.23 / 2.71 | 1.25 / 2.76 |
| RX-45 (RX45) | 221.84 | 11.91 | 25.40 | 198.02 | 1.34 / 2.95 | 1.36 / 3.00 |
| RX-46 (RX46) | 222.25 | 13.49 | 28.58 | 195.27 | 1.66 / 3.66 | 1.69 / 3.72 |
| RX-47 (RX47) | 245.26 | 19.84 | 41.28 | 205.58 | 3.88 / 8.55 | 3.94 / 8.70 |
| RX-49 (RX49) | 280.59 | 11.91 | 25.40 | 256.77 | 1.72 / 3.79 | 1.75 / 3.85 |
| RX-50 (RX50) | 283.36 | 16.66 | 31.75 | 250.04 | 2.43 / 5.36 | 2.47 / 5.45 |
| RX-53 (RX53) | 334.57 | 11.91 | 25.40 | 310.75 | 2.06 / 4.54 | 2.09 / 4.62 |
| RX-54 (RX54) | 337.34 | 16.66 | 31.75 | 304.02 | 2.92 / 6.44 | 2.97 / 6.54 |
| RX-57 (RX57) | 391.72 | 11.91 | 25.40 | 367.90 | 2.42 / 5.34 | 2.46 / 5.42 |
| RX-63 (RX63) | 441.73 | 27.00 | 50.80 | 387.73 | 11.96 / 26.4 | 12.16 / 26.8 |
| RX-65 (RX65) | 480.62 | 11.91 | 25.40 | 456.80 | 3.00 / 6.61 | 3.05 / 6.72 |
| RX-66 (RX66) | 483.39 | 16.66 | 31.75 | 450.07 | 4.26 / 9.39 | 4.33 / 9.55 |
| RX-69 (RX69) | 544.12 | 11.91 | 25.40 | 520.30 | 3.41 / 7.52 | 3.47 / 7.64 |
| RX-70 (RX70) | 550.06 | 19.84 | 41.28 | 510.38 | 9.15 / 20.2 | 9.30 / 20.5 |
| RX-73 (RX73) | 596.11 | 13.49 | 31.75 | 569.13 | 5.27 / 11.6 | 5.36 / 11.8 |
| RX-74 (RX74) | 600.86 | 19.84 | 41.28 | 561.18 | 10.01 / 22.1 | 10.18 / 22.4 |
| RX-82 (RX82) | 67.87 | 11.91 | 25.40 | 44.05 | 0.360 / 0.794 | 0.366 / 0.807 |
| RX-84 (RX84) | 74.22 | 11.91 | 25.40 | 50.40 | 0.400 / 0.882 | 0.407 / 0.896 |
| RX-85 (RX85) | 90.09 | 13.49 | 25.40 | 63.11 | 0.520 / 1.15 | 0.529 / 1.17 |
| RX-86 (RX86) | 103.58 | 15.09 | 28.58 | 73.40 | 0.810 / 1.79 | 0.823 / 1.82 |
| RX-87 (RX87) | 113.11 | 15.09 | 28.58 | 82.93 | 0.900 / 1.98 | 0.915 / 2.02 |
| RX-88 (RX88) | 139.29 | 17.48 | 31.75 | 104.33 | 1.46 / 3.22 | 1.48 / 3.27 |
| RX-89 (RX89) | 129.77 | 18.26 | 31.75 | 93.25 | 1.35 / 2.98 | 1.37 / 3.03 |
| RX-90 (RX90) | 174.63 | 19.84 | 44.45 | 134.95 | 3.09 / 6.81 | 3.14 / 6.93 |
| RX-91 (RX91) | 286.94 | 30.18 | 45.24 | 226.58 | 7.75 / 17.1 | 7.88 / 17.4 |
| RX-99 (RX99) | 245.67 | 11.91 | 25.40 | 221.85 | 1.50 / 3.31 | 1.52 / 3.36 |
| RX-201 (RX201) | 51.46 | 5.74 | 11.30 | 39.98 | 0.100 / 0.220 | 0.102 / 0.224 |
| RX-205 (RX205) | 62.31 | 5.56 | 11.10 | 51.19 | 0.130 / 0.287 | 0.132 / 0.291 |
| RX-210 (RX210) | 97.64 | 9.53 | 19.05 | 78.58 | 0.350 / 0.772 | 0.356 / 0.784 |
| RX-215 (RX215) | 140.89 | 11.91 | 25.40 | 117.07 | 0.800 / 1.76 | 0.813 / 1.79 |
BX-Type Ring Joint Gasket Weights
BX rings are used on API 6BX flanges (2,000–20,000 psi) and always have a pressure-passage hole. Nominal sizes follow API 6A flange sizes in inches.
| Ring No. | Nominal size (in / mm) | OD (mm) | Height H (mm) | Width A (mm) | ID (mm) | Carbon steel (kg / lb) | SS316 (kg / lb) |
|---|---|---|---|---|---|---|---|
| BX-150 (BX150) | 1-11/16″ / 43 | 72.19 | 9.30 | 9.30 | 53.59 | 0.134 / 0.295 | 0.136 / 0.300 |
| BX-151 (BX151) | 1-13/16″ / 46 | 76.40 | 9.63 | 9.63 | 57.14 | 0.153 / 0.337 | 0.156 / 0.343 |
| BX-152 (BX152) | 2-1/16″ / 52 | 84.68 | 10.24 | 10.24 | 64.20 | 0.193 / 0.425 | 0.196 / 0.433 |
| BX-153 (BX153) | 2-9/16″ / 65 | 100.94 | 11.38 | 11.38 | 78.18 | 0.287 / 0.633 | 0.292 / 0.643 |
| BX-154 (BX154) | 3-1/16″ / 78 | 116.84 | 12.40 | 12.40 | 92.04 | 0.398 / 0.877 | 0.405 / 0.892 |
| BX-155 (BX155) | 4-1/16″ / 103 | 147.96 | 14.22 | 14.22 | 119.52 | 0.655 / 1.44 | 0.666 / 1.47 |
| BX-156 (BX156) | 7-1/16″ / 179 | 237.92 | 18.62 | 18.62 | 200.68 | 1.88 / 4.15 | 1.91 / 4.22 |
| BX-157 (BX157) | 9″ / 229 | 294.46 | 20.98 | 20.98 | 252.50 | 2.98 / 6.56 | 3.03 / 6.67 |
| BX-158 (BX158) | 11″ / 279 | 352.04 | 23.14 | 23.14 | 305.76 | 4.36 / 9.62 | 4.44 / 9.78 |
| BX-159 (BX159) | 13-5/8″ / 346 | 426.72 | 25.70 | 25.70 | 375.32 | 6.55 / 14.4 | 6.66 / 14.7 |
| BX-160 (BX160) | 13-5/8″ / 346 | 402.59 | 23.83 | 13.74 | 375.11 | 3.07 / 6.76 | 3.12 / 6.88 |
| BX-161 (BX161) | 16-3/4″ / 422 | 491.41 | 28.07 | 16.21 | 458.99 | 5.35 / 11.8 | 5.44 / 12.0 |
| BX-162 (BX162) | 16-3/4″ / 422 | 475.49 | 14.22 | 14.22 | 447.05 | 2.26 / 4.98 | 2.30 / 5.06 |
| BX-163 (BX163) | 18-3/4″ / 476 | 556.16 | 30.10 | 17.37 | 521.42 | 6.53 / 14.4 | 6.64 / 14.6 |
| BX-164 (BX164) | 18-3/4″ / 476 | 570.56 | 30.10 | 24.59 | 521.38 | 9.54 / 21.0 | 9.70 / 21.4 |
| BX-165 (BX165) | 21-1/4″ / 540 | 624.71 | 32.03 | 18.49 | 587.73 | 8.76 / 19.3 | 8.91 / 19.6 |
| BX-166 (BX166) | 21-1/4″ / 540 | 640.03 | 32.03 | 26.14 | 587.75 | 12.82 / 28.3 | 13.03 / 28.7 |
| BX-167 (BX167) | 26-3/4″ / 680 | 759.36 | 35.86 | 13.11 | 733.14 | 8.53 / 18.8 | 8.67 / 19.1 |
| BX-168 (BX168) | 26-3/4″ / 680 | 765.25 | 35.86 | 16.05 | 733.15 | 11.14 / 24.6 | 11.32 / 25.0 |
| BX-169 (BX169) | 5-1/8″ / 130 | 173.51 | 15.85 | 12.93 | 147.65 | 0.730 / 1.61 | 0.742 / 1.64 |
| BX-170 (BX170) | 6-5/8″ / 168 | 218.03 | 14.22 | 14.22 | 189.59 | 1.03 / 2.27 | 1.05 / 2.31 |
| BX-171 (BX171) | 8-9/16″ / 218 | 267.44 | 14.22 | 14.22 | 239.00 | 1.24 / 2.73 | 1.26 / 2.78 |
| BX-172 (BX172) | 11-5/32″ / 283 | 333.07 | 14.22 | 14.22 | 304.63 | 1.56 / 3.44 | 1.59 / 3.50 |
| BX-303 (BX303) | 30″ / 762 | 852.75 | 37.95 | 16.97 | 818.81 | 11.88 / 26.2 | 12.08 / 26.6 |
Converting to Other Materials
Multiply the carbon steel weight by the factor below. For example, an R-46 octagonal ring is 1.06 kg in carbon steel, so about 1.06 × 1.017 ≈ 1.07 kg in SS316, or 1.06 × 1.075 = 1.14 kg in Inconel 625.
| Material | B16.20 marking | Density (g/cm³) | Factor vs carbon steel |
|---|---|---|---|
| Soft iron | D | 7.87 | 1.003 |
| Low carbon steel | S | 7.85 | 1.000 |
| 4–6% Cr-½Mo (F5) | F5 | 7.75 | 0.987 |
| SS410 | S410 | 7.75 | 0.987 |
| SS304 / 304L | S304 | 7.93 | 1.010 |
| SS316 / 316L | S316 | 7.98 | 1.017 |
| SS347 | S347 | 7.96 | 1.014 |
| Duplex 2205 | — | 7.80 | 0.994 |
| Incoloy 825 | — | 8.14 | 1.037 |
| Inconel 625 | — | 8.44 | 1.075 |
Worked Example: Shipping Weight for 100 RX-54 Rings
100 × RX-54 in SS316 is about 100 × 2.97 = 297 kg net by theory. Actual rings often come out a little heavier because of machining allowance, so allow 3.0–3.5 kg per ring. Packed in one export wooden case, the gross weight is typically around 350–400 kg. For air freight, compare this with the volumetric weight of the case and quote on the higher figure.
Practical Notes for Buyers
- A higher ring number does not mean a heavier ring. Compare rings within the same cross-section family.
- R and RX rings with the same number fit the same groove but differ in weight, so confirm which one the drawing calls for before quoting freight.
- For oval vs octagonal R rings, use the column that matches the order; the difference is usually a few percent and can reach about 10%.
- Material certificates and hardness reports do not change the weight, but plating (for example zinc on soft iron rings) adds a small amount that is not included here.
For specifications, materials and marking options, see our FS-G003 Ring Joint Gasket page. If you also buy spiral wound gaskets, our spiral wound gasket weight chart covers CG and CGI styles for ASME B16.5 and B16.47.
FAQ
How much does an R-46 ring joint gasket weigh?
An R-46 weighs about 1.08 kg / 2.39 lb (oval) or 1.06 kg / 2.33 lb (octagonal) in carbon steel or soft iron, and about 1.07 kg / 2.37 lb octagonal in SS316.
Why is my supplier’s weight different from this chart?
This chart gives theoretical finished-ring weights. A supplier may quote the forged blank weight, a packed weight, or a value from a catalog with shifted rows. Ask whether the figure is net, gross or blank weight.
How do I calculate the weight of a ring joint gasket?
Weight = cross-section area × π × mean diameter × density. For R rings the mean diameter is the pitch diameter P; for RX and BX use OD − A. The octagonal section is the rectangle A × H minus the four corners cut by the 23° bevels.
Do RX rings weigh more than R rings?
Yes. RX rings are taller than R rings with the same number, typically 20–60% heavier depending on size. For example, RX-54 is about 2.92 kg (6.44 lb) and R-54 about 2.35–2.40 kg (5.2–5.3 lb) in carbon steel.
Get a Quote for Ring Joint Gaskets
Send us the ring numbers, materials and quantities. We usually reply within 12 hours with a quotation, lead time and estimated shipping weight.
💬 WhatsApp: +86 187 1010 7193
✉️ Email: sales@felixsealing.com
🌐 www.felixsealing.com
Quick reference: weights of frequently requested ring numbers
- R-14 (R14) ring joint gasket weight: oval 0.110 / 0.243, octagonal 0.102 / 0.225 (carbon steel / soft iron, kg / lb); SS316 octagonal 0.104 / 0.229.
- R-20 (R20) ring joint gasket weight: oval 0.169 / 0.373, octagonal 0.156 / 0.344 (carbon steel / soft iron, kg / lb); SS316 octagonal 0.159 / 0.350.
- R-24 (R24) ring joint gasket weight: oval 0.395 / 0.871, octagonal 0.384 / 0.847 (carbon steel / soft iron, kg / lb); SS316 octagonal 0.390 / 0.861.
- R-35 (R35) ring joint gasket weight: oval 0.567 / 1.25, octagonal 0.549 / 1.21 (carbon steel / soft iron, kg / lb); SS316 octagonal 0.558 / 1.23.
- R-46 (R46) ring joint gasket weight: oval 1.08 / 2.39, octagonal 1.06 / 2.33 (carbon steel / soft iron, kg / lb); SS316 octagonal 1.07 / 2.37.
- R-53 (R53) ring joint gasket weight: oval 1.36 / 3.00, octagonal 1.31 / 2.88 (carbon steel / soft iron, kg / lb); SS316 octagonal 1.33 / 2.93.
- R-54 (R54) ring joint gasket weight: oval 2.40 / 5.29, octagonal 2.35 / 5.18 (carbon steel / soft iron, kg / lb); SS316 octagonal 2.39 / 5.27.
- R-55 (R55) ring joint gasket weight: oval 7.36 / 16.2, octagonal 7.73 / 17.0 (carbon steel / soft iron, kg / lb); SS316 octagonal 7.86 / 17.3.
- R-58 (R58) ring joint gasket weight: oval 4.99 / 11.0, octagonal 5.05 / 11.1 (carbon steel / soft iron, kg / lb); SS316 octagonal 5.13 / 11.3.
- R-66 (R66) ring joint gasket weight: oval 3.48 / 7.67, octagonal 3.42 / 7.53 (carbon steel / soft iron, kg / lb); SS316 octagonal 3.47 / 7.66.
- R-67 (R67) ring joint gasket weight: oval 10.12 / 22.3, octagonal 10.61 / 23.4 (carbon steel / soft iron, kg / lb); SS316 octagonal 10.79 / 23.8.
- R-78 (R78) ring joint gasket weight: oval 12.29 / 27.1, octagonal 12.51 / 27.6 (carbon steel / soft iron, kg / lb); SS316 octagonal 12.72 / 28.0.
- R-102 (R102) ring joint gasket weight: octagonal 23.39 / 51.6 (carbon steel / soft iron, kg / lb); SS316 23.78 / 52.4. No oval type.
- RX-54 (RX54) ring joint gasket weight: 2.92 / 6.44 carbon steel, 2.97 / 6.54 SS316 (kg / lb); OD 337.34 mm.
- RX-73 (RX73) ring joint gasket weight: 5.27 / 11.6 carbon steel, 5.36 / 11.8 SS316 (kg / lb); OD 596.11 mm.
- BX-152 (BX152) ring joint gasket weight: 0.193 / 0.425 carbon steel, 0.196 / 0.433 SS316 (kg / lb); OD 84.68 mm.
- BX-155 (BX155) ring joint gasket weight: 0.655 / 1.44 carbon steel, 0.666 / 1.47 SS316 (kg / lb); OD 147.96 mm.
- BX-169 (BX169) ring joint gasket weight: 0.730 / 1.61 carbon steel, 0.742 / 1.64 SS316 (kg / lb); OD 173.51 mm.
