Product Guides November 4, 2026

Ring Joint Gasket Dimensions: R, RX and BX Size Chart (ASME B16.20)

Buyers and engineers look up ring joint gasket dimensions to confirm a ring number, to check a drawing, or to make sure an R ring, an RX ring and a flange groove actually match. This chart lists the dimensions of every R, RX and BX ring in ASME B16.20-2023, and shows which ring number fits each ASME B16.5, B16.47 Series A and API 6B / 6BX flange.

All dimensions are in millimetres (1 in = 25.4 mm) and are nominal values from ASME B16.20-2023. Ring numbers are written in several ways — R-46, R46 or R 46 — and all refer to the same ring.

Jump to:Ring No. by flangeR typeRX typeBX type

Step 1: Find the Ring Number for Your Flange

Most inquiries give the flange size and pressure class instead of the ring number. Find the nominal pipe size (NPS) in the left column, then read across to the pressure class. Class 300 and Class 600 flanges of the same size use the same ring. RX rings use the same ring numbers as R rings on API 6B flanges.

NPSB16.5 Class 150B16.5 Class 300 / 600B16.5 Class 900B16.5 Class 1500B16.5 Class 2500API 6B 2000 psiAPI 6B 3000 psiAPI 6B 5000 psi
1/2″—R-11R-12†R-12R-13———
3/4″—R-13R-14†R-14R-16———
1″R-15R-16R-16R-16R-18R-16R-16R-16 / R-82§
1-1/4″R-17R-18R-18†R-18R-21R-18R-18R-18
1-1/2″R-19R-20R-20†R-20R-23R-20R-20R-20 / R-84§
2″R-22R-23R-24†R-24R-26R-23R-24R-24 / R-85§
2-1/2″R-25R-26R-27†R-27R-28R-26R-27R-27 / R-86§
3″R-29R-30‡ / R-31R-31R-35R-32R-31R-31R-35 / R-87§
3-1/2″R-33R-34—————R-37 / R-89§
4″R-36R-37R-37R-39R-38R-37R-37R-39 / R-88§
5″R-40R-41R-41R-44R-42R-41R-41R-44 / R-90§
6″R-43R-45R-45R-46R-47R-45R-45R-46
8″R-48R-49R-49R-50R-51R-49 / R-99R-49 / R-99R-50
10″R-52R-53R-53R-54R-55R-53R-53R-54 / R-91§
12″R-56R-57R-57R-58R-60R-57R-57—
14″R-59R-61R-62R-63—R-61R-61—
16″R-64R-65R-66R-67—R-65R-66—
18″R-68R-69R-70R-71—R-69R-70—
20″R-72R-73R-74R-75—R-73R-74—
22″R-80R-81——————
24″R-76R-77R-78R-79————
Table 1. R ring number by flange size: ASME B16.5 pressure classes and API 6B pressure ratings. † Class 900 in this size uses the Class 1500 flange and ring. ‡ R-30 is for lapped joints only. § R-82 to R-91 are for API 6B 5000 psi segmented (multiple-completion) flanges.
NPSB16.47 Series A Class 150B16.47 Series A Class 300 / 600B16.47 Series A Class 900
26″—R-93R-100
28″—R-94R-101
30″—R-95R-102
32″—R-96R-103
34″—R-97R-104
36″—R-98R-105
Table 2. R ring number for ASME B16.47 Series A flanges (NPS 26 and larger).

↑ Back to top

R-Type Ring Joint Gasket Dimensions

R rings come in oval and octagonal sections with the same pitch diameter P and width A, so both fit the same groove. Oval rings are older and fit both round-bottom and flat-bottom grooves; octagonal rings seal better and are the usual choice for modern flat-bottom grooves. R-80 and larger are made in octagonal section only.

Ring No.Pitch dia. PWidth AOval height BOctagonal height HOctagonal flat CRadius R1ID (P − A)
R-11 (R11)34.146.3511.29.74.321.527.79
R-12 (R12)39.707.9514.212.75.231.531.75
R-13 (R13)42.887.9514.212.75.231.534.93
R-14 (R14)44.457.9514.212.75.231.536.50
R-15 (R15)47.637.9514.212.75.231.539.68
R-16 (R16)50.807.9514.212.75.231.542.85
R-17 (R17)57.157.9514.212.75.231.549.20
R-18 (R18)60.337.9514.212.75.231.552.38
R-19 (R19)65.107.9514.212.75.231.557.15
R-20 (R20)68.287.9514.212.75.231.560.33
R-21 (R21)72.2411.1317.516.07.751.561.11
R-22 (R22)82.557.9514.212.75.231.574.60
R-23 (R23)82.5511.1317.516.07.751.571.42
R-24 (R24)95.2511.1317.516.07.751.584.12
R-25 (R25)101.607.9514.212.75.231.593.65
R-26 (R26)101.6011.1317.516.07.751.590.47
R-27 (R27)107.9511.1317.516.07.751.596.82
R-28 (R28)111.1312.7019.117.58.661.598.43
R-29 (R29)114.307.9514.212.75.231.5106.35
R-30 (R30)117.4811.1317.516.07.751.5106.35
R-31 (R31)123.8311.1317.516.07.751.5112.70
R-32 (R32)127.0012.7019.117.58.661.5114.30
R-33 (R33)131.787.9514.212.75.231.5123.83
R-34 (R34)131.7811.1317.516.07.751.5120.65
R-35 (R35)136.5311.1317.516.07.751.5125.40
R-36 (R36)149.237.9514.212.75.231.5141.28
R-37 (R37)149.2311.1317.516.07.751.5138.10
R-38 (R38)157.1815.8822.420.610.491.5141.30
R-39 (R39)161.9311.1317.516.07.751.5150.80
R-40 (R40)171.457.9514.212.75.231.5163.50
R-41 (R41)180.9811.1317.516.07.751.5169.85
R-42 (R42)190.5019.0525.423.912.321.5171.45
R-43 (R43)193.687.9514.212.75.231.5185.73
R-44 (R44)193.6811.1317.516.07.751.5182.55
R-45 (R45)211.1511.1317.516.07.751.5200.02
R-46 (R46)211.1512.7019.117.58.661.5198.45
R-47 (R47)228.6019.0525.423.912.321.5209.55
R-48 (R48)247.657.9514.212.75.231.5239.70
R-49 (R49)269.8811.1317.516.07.751.5258.75
R-50 (R50)269.8815.8822.420.610.491.5254.00
R-51 (R51)279.4022.2328.726.914.811.5257.17
R-52 (R52)304.807.9514.212.75.231.5296.85
R-53 (R53)323.8511.1317.516.07.751.5312.72
R-54 (R54)323.8515.8822.420.610.491.5307.97
R-55 (R55)342.9028.5836.635.119.812.3314.32
R-56 (R56)381.007.9514.212.75.231.5373.05
R-57 (R57)381.0011.1317.516.07.751.5369.87
R-58 (R58)381.0022.2328.726.914.811.5358.77
R-59 (R59)396.887.9514.212.75.231.5388.93
R-60 (R60)406.4031.7539.638.122.332.3374.65
R-61 (R61)419.1011.1317.516.07.751.5407.97
R-62 (R62)419.1015.8822.420.610.491.5403.22
R-63 (R63)419.1025.4033.331.817.302.3393.70
R-64 (R64)454.037.9514.212.75.231.5446.08
R-65 (R65)469.9011.1317.516.07.751.5458.77
R-66 (R66)469.9015.8822.420.610.491.5454.02
R-67 (R67)469.9028.5836.635.119.812.3441.32
R-68 (R68)517.537.9514.212.75.231.5509.58
R-69 (R69)533.4011.1317.516.07.751.5522.27
R-70 (R70)533.4019.0525.423.912.321.5514.35
R-71 (R71)533.4028.5836.635.119.812.3504.82
R-72 (R72)558.807.9514.212.75.231.5550.85
R-73 (R73)584.2012.7019.117.58.661.5571.50
R-74 (R74)584.2019.0525.423.912.321.5565.15
R-75 (R75)584.2031.7539.638.122.332.3552.45
R-76 (R76)673.107.9514.212.75.231.5665.15
R-77 (R77)692.1515.8822.420.610.491.5676.27
R-78 (R78)692.1525.4033.331.817.302.3666.75
R-79 (R79)692.1534.9344.541.424.822.3657.22
R-80 (R80)615.957.95—12.75.231.5608.00
R-81 (R81)635.0014.30—19.19.581.5620.70
R-82 (R82)57.1511.13—16.07.751.546.02
R-84 (R84)63.5011.13—16.07.751.552.37
R-85 (R85)79.3812.70—17.58.661.566.68
R-86 (R86)90.5015.88—20.610.491.574.62
R-87 (R87)100.0315.88—20.610.491.584.15
R-88 (R88)123.8319.05—23.912.321.5104.78
R-89 (R89)114.3019.05—23.912.321.595.25
R-90 (R90)155.5822.23—26.914.811.5133.35
R-91 (R91)260.3531.75—38.122.332.3228.60
R-92 (R92)228.6011.1317.516.07.751.5217.47
R-93 (R93)749.3019.05—23.912.321.5730.25
R-94 (R94)800.1019.05—23.912.321.5781.05
R-95 (R95)857.2519.05—23.912.321.5838.20
R-96 (R96)914.4022.23—26.914.811.5892.17
R-97 (R97)965.2022.23—26.914.811.5942.97
R-98 (R98)1022.3522.23—26.914.811.51000.12
R-99 (R99)234.9511.13—16.07.751.5223.82
R-100 (R100)749.3028.58—35.119.812.3720.72
R-101 (R101)800.1031.75—38.122.332.3768.35
R-102 (R102)857.2531.75—38.122.332.3825.50
R-103 (R103)914.4031.75—38.122.332.3882.65
R-104 (R104)965.2034.93—41.424.822.3930.27
R-105 (R105)1022.3534.93—41.424.822.3987.42
Table 3. R-type ring joint gasket dimensions (mm). Bold = frequently requested sizes. ID is calculated, not a B16.20 dimension.

Tolerances for R rings in ASME B16.20: pitch diameter P ±0.18 mm, width A ±0.20 mm, heights B and H +1.3 / −0.5 mm. The 23° bevel on the octagonal ring matches the 23° wall of the flange groove.

↑ Back to top

RX-Type Ring Joint Gasket Dimensions

RX rings are pressure-energized: the taller outside face seals against the groove as internal pressure rises. They fit API 6B flanges with the same ring number as the R ring. Large-section RX rings (RX-82 to RX-91) have a pressure-passage hole E through the ring.

Ring No.ODWidth AFlat COutside bevel DHeight HRadius R1Pressure hole EID (OD − 2A)API 6B flange size (psi rating)
RX-20 (RX20)76.208.744.623.1819.051.5—58.721-1/2″ (2000/3000/5000)
RX-23 (RX23)93.2711.916.454.2425.401.5—69.452″ (2000)
RX-24 (RX24)105.9711.916.454.2425.401.5—82.152″ (3000/5000)
RX-25 (RX25)109.558.744.623.1819.051.5—92.073-1/8″ (5000)
RX-26 (RX26)111.9111.916.454.2425.401.5—88.092-1/2″ (2000)
RX-27 (RX27)118.2611.916.454.2425.401.5—94.442-1/2″ (3000/5000)
RX-31 (RX31)134.5411.916.454.2425.401.5—110.723″ (2000/3000)
RX-35 (RX35)147.2411.916.454.2425.401.5—123.423″ (5000)
RX-37 (RX37)159.9411.916.454.2425.401.5—136.124″ (2000/3000)
RX-39 (RX39)172.6411.916.454.2425.401.5—148.824″ (5000)
RX-41 (RX41)191.6911.916.454.2425.401.5—167.875″ (2000/3000)
RX-44 (RX44)204.3911.916.454.2425.401.5—180.575″ (5000)
RX-45 (RX45)221.8411.916.454.2425.401.5—198.026″ (2000/3000)
RX-46 (RX46)222.2513.496.684.7828.581.5—195.276″ (5000)
RX-47 (RX47)245.2619.8410.346.8841.282.3—205.588″ * (5000)
RX-49 (RX49)280.5911.916.454.2425.401.5—256.778″ (2000/3000)
RX-50 (RX50)283.3616.668.515.2831.751.5—250.048″ (5000)
RX-53 (RX53)334.5711.916.454.2425.401.5—310.7510″ (2000/3000)
RX-54 (RX54)337.3416.668.515.2831.751.5—304.0210″ (5000)
RX-57 (RX57)391.7211.916.454.2425.401.5—367.9012″ (2000/3000)
RX-63 (RX63)441.7327.0014.788.4650.802.3—387.7314″ (5000)
RX-65 (RX65)480.6211.916.454.2425.401.5—456.8016″ (2000)
RX-66 (RX66)483.3916.668.515.2831.751.5—450.0716″ (3000)
RX-69 (RX69)544.1211.916.454.2425.401.5—520.3018″ (2000)
RX-70 (RX70)550.0619.8410.346.8841.282.3—510.3818″ (3000)
RX-73 (RX73)596.1113.496.685.2831.751.5—569.1320″ (2000)
RX-74 (RX74)600.8619.8410.346.8841.282.3—561.1820″ (3000)
RX-82 (RX82)67.8711.916.454.2425.401.51.544.051″ (2900)
RX-84 (RX84)74.2211.916.454.2425.401.51.550.401-1/2″ (2900)
RX-85 (RX85)90.0913.496.684.2425.401.51.563.112″ (2900)
RX-86 (RX86)103.5815.098.514.7828.581.52.373.402-1/2″ (2900)
RX-87 (RX87)113.1115.098.514.7828.581.52.382.933″ (2900)
RX-88 (RX88)139.2917.4810.345.2831.751.53.0104.334″ (2900)
RX-89 (RX89)129.7718.2610.345.2831.751.53.093.253-1/2″ (2900)
RX-90 (RX90)174.6319.8412.177.4244.452.33.0134.955″ (2900)
RX-91 (RX91)286.9430.1819.817.5445.242.33.0226.5810″ (2900)
RX-99 (RX99)245.6711.916.454.2425.401.5—221.858″ * (2000/3000)
RX-201 (RX201)51.465.743.201.4511.300.5—39.981-3/8″ (5000)
RX-205 (RX205)62.315.563.051.8311.100.5—51.191-13/16″ (5000)
RX-210 (RX210)97.649.535.413.1819.050.8—78.582-9/16″ (5000)
RX-215 (RX215)140.8911.915.334.2425.401.5—117.074-1/16″ (5000)
Table 4. RX-type ring joint gasket dimensions (mm) and the API 6B flanges they fit. 2900 psi is an obsolete rating. * Segmented / crossover flange. Bold = frequently requested sizes.

↑ Back to top

BX-Type Ring Joint Gasket Dimensions

BX rings are used on API 6BX flanges from 2,000 to 20,000 psi. They are near-square octagonal rings designed for face-to-face make-up, and every BX ring has a pressure-passage hole D. The nominal size follows the API 6A flange size in inches.

Ring No.Nominal sizeODHeight HWidth AFlat OD ODTFlat CHole DID (OD − 2A)API 6BX flange size (psi rating)
BX-150 (BX150)1-11/16″ / 43 mm72.199.309.3070.877.981.553.591-11/16″ (10,000/15,000)
BX-151 (BX151)1-13/16″ / 46 mm76.409.639.6375.038.261.557.141-13/16″ (10,000/15,000/20,000)
BX-152 (BX152)2-1/16″ / 52 mm84.6810.2410.2483.248.791.564.202-1/16″ (10,000/15,000/20,000)
BX-153 (BX153)2-9/16″ / 65 mm100.9411.3811.3899.319.781.578.182-9/16″ (10,000/15,000/20,000)
BX-154 (BX154)3-1/16″ / 78 mm116.8412.4012.40115.0910.641.592.043-1/16″ (10,000/15,000/20,000)
BX-155 (BX155)4-1/16″ / 103 mm147.9614.2214.22145.9512.221.5119.524-1/16″ (10,000/15,000/20,000)
BX-156 (BX156)7-1/16″ / 179 mm237.9218.6218.62235.2815.983.0200.687-1/16″ (10,000/15,000/20,000)
BX-157 (BX157)9″ / 229 mm294.4620.9820.98291.4918.013.0252.509″ (10,000/15,000/20,000)
BX-158 (BX158)11″ / 279 mm352.0423.1423.14348.7719.863.0305.7611″ (10,000/15,000/20,000)
BX-159 (BX159)13-5/8″ / 346 mm426.7225.7025.70423.0922.073.0375.3213-5/8″ (10,000/15,000/20,000)
BX-160 (BX160)13-5/8″ / 346 mm402.5923.8313.74399.2110.363.0375.1113-5/8″ (5000)
BX-161 (BX161)16-3/4″ / 422 mm491.4128.0716.21487.4512.243.0458.9916-3/4″ (5000)
BX-162 (BX162)16-3/4″ / 422 mm475.4914.2214.22473.4812.221.5447.0516-3/4″ (5000/10,000/15,000)
BX-163 (BX163)18-3/4″ / 476 mm556.1630.1017.37551.8913.113.0521.4218-3/4″ (5000)
BX-164 (BX164)18-3/4″ / 476 mm570.5630.1024.59566.2920.323.0521.3818-3/4″ (10,000/15,000)
BX-165 (BX165)21-1/4″ / 540 mm624.7132.0318.49620.1913.973.0587.7321-1/4″ (5000)
BX-166 (BX166)21-1/4″ / 540 mm640.0332.0326.14635.5121.623.0587.7521-1/4″ (10,000)
BX-167 (BX167)26-3/4″ / 680 mm759.3635.8613.11754.288.031.5733.1426-3/4″ (2000)
BX-168 (BX168)26-3/4″ / 680 mm765.2535.8616.05760.1710.971.5733.1526-3/4″ (3000)
BX-169 (BX169)5-1/8″ / 130 mm173.5115.8512.93171.2710.691.5147.655-1/8″ (10,000)
BX-170 (BX170)6-5/8″ / 168 mm218.0314.2214.22216.0312.221.5189.596-5/8″ (10,000/15,000)
BX-171 (BX171)8-9/16″ / 218 mm267.4414.2214.22265.4312.221.5239.008-9/16″ (10,000/15,000)
BX-172 (BX172)11-5/32″ / 283 mm333.0714.2214.22331.0612.221.5304.6311-5/32″ (10,000/15,000)
BX-303 (BX303)30″ / 762 mm852.7537.9516.97847.3711.611.5818.8130″ (2000/3000)
Table 5. BX-type ring joint gasket dimensions (mm) and the API 6BX flanges they fit. Bold = frequently requested sizes.

↑ Back to top

How to Check a Ring Before Ordering

  • Confirm the type, not only the number. R-54, RX-54 and an oval or octagonal R-54 are different parts. Ask for the type and section if the inquiry only says “ring 54”.
  • Measure the pitch diameter, not the OD, for R rings. For an R ring, P is measured at the centre of the width; for RX and BX rings, the reference dimension is the OD.
  • Check the groove standard. API 6B and ASME B16.5 share R ring numbers, but API 6BX flanges need BX rings only.
  • State the material and hardness. The ring must be softer than the flange groove. Soft iron, low carbon steel, F5, SS410, SS304 and SS316 are the common choices, with maximum hardness set in ASME B16.20.

For materials, marking and packing options, see our FS-G003 Ring Joint Gasket page. To estimate freight, our ring joint gasket weight chart lists the weight of every ring in kg and lb. For raised-face flanges, see the spiral wound gasket dimensions chart.

FAQ

What are the dimensions of an R-46 ring joint gasket?

R-46 has a pitch diameter P of 211.15 mm, a width A of 12.70 mm, an oval height of 19.1 mm and an octagonal height of 17.5 mm. It fits ASME B16.5 Class 1500 NPS 6″ and API 6B 5000 psi 6″ flanges.

Can an RX ring replace an R ring?

An RX ring fits the groove of an R ring with the same number on API 6B flanges, but it is taller, so the flange gap changes. Confirm with the end user before substituting; the reverse substitution is not recommended.

What is the difference between oval and octagonal ring gaskets?

Both have the same pitch diameter and width and fit the same groove. Oval rings fit both round-bottom and flat-bottom grooves; octagonal rings fit flat-bottom grooves and give a more reliable seal. Octagonal rings are the more common choice today.

How do I find the ring number from the flange size?

Use Table 1 for ASME B16.5 and API 6B flanges, or Table 2 for ASME B16.47 Series A: find the NPS, then read across to the pressure class. Class 300 and Class 600 flanges of the same size share one ring number.

Get a Quote for Ring Joint Gaskets

Send us the ring numbers (or flange size and class), materials and quantities. We usually reply within 12 hours with a quotation and lead time.

💬 WhatsApp: +86 187 1010 7193
✉️ Email: sales@felixsealing.com
🌐 www.felixsealing.com

Quick reference: dimensions of frequently requested ring numbers
  • R-14 (R14) ring joint gasket dimensions: P 44.45 mm, A 7.95 mm, oval B 14.2 mm, octagonal H 12.7 mm, ID 36.50 mm. Fits B16.5 Class 900 NPS 3/4″, B16.5 Class 1500 NPS 3/4″.
  • R-20 (R20) ring joint gasket dimensions: P 68.28 mm, A 7.95 mm, oval B 14.2 mm, octagonal H 12.7 mm, ID 60.33 mm. Fits B16.5 Class 300/600 NPS 1-1/2″, B16.5 Class 900 NPS 1-1/2″, B16.5 Class 1500 NPS 1-1/2″, API 6B 2000 psi NPS 1-1/2″.
  • R-24 (R24) ring joint gasket dimensions: P 95.25 mm, A 11.13 mm, oval B 17.5 mm, octagonal H 16.0 mm, ID 84.12 mm. Fits B16.5 Class 900 NPS 2″, B16.5 Class 1500 NPS 2″, API 6B 3000 psi NPS 2″, API 6B 5000 psi NPS 2″.
  • R-35 (R35) ring joint gasket dimensions: P 136.53 mm, A 11.13 mm, oval B 17.5 mm, octagonal H 16.0 mm, ID 125.40 mm. Fits B16.5 Class 1500 NPS 3″, API 6B 5000 psi NPS 3″.
  • R-46 (R46) ring joint gasket dimensions: P 211.15 mm, A 12.70 mm, oval B 19.1 mm, octagonal H 17.5 mm, ID 198.45 mm. Fits B16.5 Class 1500 NPS 6″, API 6B 5000 psi NPS 6″.
  • R-53 (R53) ring joint gasket dimensions: P 323.85 mm, A 11.13 mm, oval B 17.5 mm, octagonal H 16.0 mm, ID 312.72 mm. Fits B16.5 Class 300/600 NPS 10″, B16.5 Class 900 NPS 10″, API 6B 2000 psi NPS 10″, API 6B 3000 psi NPS 10″.
  • R-54 (R54) ring joint gasket dimensions: P 323.85 mm, A 15.88 mm, oval B 22.4 mm, octagonal H 20.6 mm, ID 307.97 mm. Fits B16.5 Class 1500 NPS 10″, API 6B 5000 psi NPS 10″.
  • R-55 (R55) ring joint gasket dimensions: P 342.90 mm, A 28.58 mm, oval B 36.6 mm, octagonal H 35.1 mm, ID 314.32 mm. Fits B16.5 Class 2500 NPS 10″.
  • R-58 (R58) ring joint gasket dimensions: P 381.00 mm, A 22.23 mm, oval B 28.7 mm, octagonal H 26.9 mm, ID 358.77 mm. Fits B16.5 Class 1500 NPS 12″.
  • R-66 (R66) ring joint gasket dimensions: P 469.90 mm, A 15.88 mm, oval B 22.4 mm, octagonal H 20.6 mm, ID 454.02 mm. Fits B16.5 Class 900 NPS 16″, API 6B 3000 psi NPS 16″.
  • R-67 (R67) ring joint gasket dimensions: P 469.90 mm, A 28.58 mm, oval B 36.6 mm, octagonal H 35.1 mm, ID 441.32 mm. Fits B16.5 Class 1500 NPS 16″.
  • R-78 (R78) ring joint gasket dimensions: P 692.15 mm, A 25.40 mm, oval B 33.3 mm, octagonal H 31.8 mm, ID 666.75 mm. Fits B16.5 Class 900 NPS 24″.
  • R-102 (R102) ring joint gasket dimensions: P 857.25 mm, A 31.75 mm, octagonal H 38.1 mm, ID 825.50 mm. Fits B16.47A Class 900 NPS 30″.
  • RX-54 (RX54) ring joint gasket dimensions: OD 337.34 mm, A 16.66 mm, H 31.75 mm, ID 304.02 mm. Fits API 6B 10″ (5000).
  • RX-73 (RX73) ring joint gasket dimensions: OD 596.11 mm, A 13.49 mm, H 31.75 mm, ID 569.13 mm. Fits API 6B 20″ (2000).
  • BX-152 (BX152) ring joint gasket dimensions: OD 84.68 mm, H 10.24 mm, A 10.24 mm, hole 1.5 mm, ID 64.20 mm. Fits API 6BX 2-1/16″ (10,000/15,000/20,000).
  • BX-155 (BX155) ring joint gasket dimensions: OD 147.96 mm, H 14.22 mm, A 14.22 mm, hole 1.5 mm, ID 119.52 mm. Fits API 6BX 4-1/16″ (10,000/15,000/20,000).
  • BX-169 (BX169) ring joint gasket dimensions: OD 173.51 mm, H 15.85 mm, A 12.93 mm, hole 1.5 mm, ID 147.65 mm. Fits API 6BX 5-1/8″ (10,000).