Yarns > Graphite Yarns

FS-Y004

Metal Wire Core-Reinforced Graphite Yarn

Also known as:
Metal Wire Reinforced Graphite Yarn Wire Core Graphite Yarn Inconel Reinforced Graphite Yarn SS Wire Reinforced Graphite Yarn

High-purity expandable graphite yarn with metal wires incorporated as internal core reinforcement through a composite braiding process, available in stainless steel, Inconel, and copper wire variants.

Available Sizes

1.5mm 2.0mm 2.5mm 3.0mm

Material

Expandable Graphite (Carbon ≥99%) Metal Wire: SS304 / Inconel / Copper
MOQ: 50kg, mixed sizes available
Custom Packaging & Labeling ODM & OEM Available Fast Quote within 12 Hours

Available Variants

SS304 Stainless Steel Wire Core

FS-Y004S

Reinforced by SS304 stainless steel wires.

Inconel Wire Core

FS-Y004I

Reinforced by Inconel wires, for superior high-temperature stability.

Copper Wire Core

FS-Y004C

Reinforced by copper wires.

Product Introduction

FS-Y004 series is produced from high-purity expandable graphite yarn with metal wires incorporated as internal core reinforcement through a composite braiding process, and is offered in three wire materials with distinct service profiles. FS-Y004S (SS304 stainless steel wire) offers the best balance of mechanical strength, corrosion resistance, and cost — it is the default choice for most high-pressure valve packing production; its limitation is reduced suitability in severe high-temperature oxidizing service or chloride-rich media, where stainless steel performance degrades. FS-Y004I (Inconel wire) provides the highest temperature stability and oxidation resistance of the series, fully matching the temperature capability of the graphite itself — the choice for superheated steam and high-temperature corrosive services; its limitation is the highest material cost. FS-Y004C (copper wire) offers excellent thermal conductivity, helping dissipate frictional heat in dynamic sealing, with soft conformability; its limitations are lower strength than steel wires and a service temperature capped by copper oxidation in air (approximately 300°C), restricting it to medium-temperature applications. Standard construction uses 1 wire per strand, with 3 or 5 wires available on request for higher tensile demands — note that more wires increase strength but reduce flexibility. If surface protection rather than internal strength is the priority, see FS-Y005 (metal wire jacketed); for metal-free reinforcement, see FS-Y002 (fiber core) and FS-Y003 (carbon fiber core) under Related Products.Application Scope: FS-Y004S (SS304): braiding yarn for high-pressure valve packing and piston-pump packing in general industrial, water, and mildly corrosive services. FS-Y004I (Inconel): packing yarn for superheated steam valves, boiler applications, and high-temperature corrosive services in power generation and petrochemical plants. FS-Y004C (copper): packing yarn for medium-temperature dynamic seals where frictional heat dissipation matters, such as rotating pump shafts in water and general services.

Application Scope

FS-Y004S (SS304): braiding yarn for high-pressure valve packing and piston-pump packing in general industrial, water, and mildly corrosive services. FS-Y004I (Inconel): packing yarn for superheated steam valves, boiler applications, and high-temperature corrosive services in power generation and petrochemical plants. FS-Y004C (copper): packing yarn for medium-temperature dynamic seals where frictional heat dissipation matters, such as rotating pump shafts in water and general services.

Industries Served

power-generation petrochemical chemical-processing steel

Product Gallery

Metal Wire Core-Reinforced Graphite Yarn detail
Metal Wire Core-Reinforced Graphite Yarn detail
Metal Wire Core-Reinforced Graphite Yarn detail
Metal Wire Core-Reinforced Graphite Yarn detail
Metal Wire Core-Reinforced Graphite Yarn detail

Inside Our Factory

Factory Overview

Our production facility, from the buildings to the surrounding grounds.

Felix Sealing workshop
Felix Sealing workshop
Felix Sealing workshop
Felix Sealing workshop
Felix Sealing workshop
Felix Sealing workshop
1 / 40

Production Floor

Workshops, production lines, and equipment in daily operation.

Felix Sealing workshop
Felix Sealing workshop
Felix Sealing workshop
Felix Sealing workshop
Felix Sealing workshop
Felix Sealing workshop
Felix Sealing workshop
Felix Sealing workshop
Felix Sealing workshop
Felix Sealing workshop
Felix Sealing workshop
Felix Sealing workshop
Felix Sealing workshop
Felix Sealing workshop
Felix Sealing workshop
Felix Sealing workshop
Felix Sealing workshop
Felix Sealing workshop
Felix Sealing workshop
Felix Sealing workshop
Felix Sealing workshop
Felix Sealing workshop
Felix Sealing workshop
Felix Sealing workshop
Felix Sealing workshop
Felix Sealing workshop
Felix Sealing workshop
Felix Sealing workshop
Felix Sealing workshop
Felix Sealing workshop
Felix Sealing workshop
1 / 40

Warehouse & Packing

From raw material storage to export-ready packing.

Felix Sealing workshop
Felix Sealing workshop
Felix Sealing workshop
Felix Sealing workshop
Felix Sealing workshop
Felix Sealing workshop
Felix Sealing workshop
Felix Sealing workshop
Felix Sealing workshop
Felix Sealing workshop
1 / 40

Our Factory

Manufacturing Excellence

Manufacturing

15,000+ sqm facility, 100+ technicians

Quality Control

ISO 9001 certified, 3-stage inspection

Global Export

30+ countries, all trade terms

Manufacturing Capability

Our production facility is equipped with advanced braiding machines, compression molding presses, CNC machining centers, and automated cutting lines. With over 20 years of manufacturing experience, we produce gland packing, gaskets, PTFE products, and expansion joints to international standards including ISO 9001, API 622, and ASME B16.20. 15,000+ m² production facility. 180+ braiding machines. 1,000+ tons annual capacity. In-house tooling and die-making workshop. Dedicated R&D lab for material testing.

Quality Control System

Every product undergoes multi-stage inspection — from incoming raw material verification to in-process quality checks and final dimensional and performance testing. Our QC lab is equipped with universal testing machines, hardness testers, temperature chambers, and pressure test rigs to validate every specification we publish. ISO 9001:2015 certified quality management. Full material traceability and batch records. 3-stage inspection: incoming, in-process, final. Material certificates provided with every shipment.

Workshop & Equipment

Our workshop combines traditional craftsmanship with modern automation. Key equipment includes precision braiding lines for packing production, hydraulic compression presses for sheet and gasket manufacturing, CNC lathes and milling centers for machined components, and specialized PTFE sintering ovens.

Global Export Capability

Felix Sealing products are exported to 30+ countries across Asia, the Middle East, Europe, Africa, and the Americas. Our logistics team handles all export documentation, customs clearance, and shipping coordination — from FCL sea freight to express air courier. 30+ countries served worldwide. FOB, CIF, EXW terms available. Sea freight, air freight, and express shipping. Export documentation handled in-house.

Get in Touch

Ready to Discuss Your Requirements?

Get a quote within 12 hours. Custom sizes and specifications welcome. Free samples available for evaluation.